The Gratex belt provides a closer mesh with greater strength than the Balanced weave. It is similar in construction to the Balanced belt, exept the spirals are more closely wound and a straight connector rod is used. This results in a stronger construction and reduced the possibility of product being retained in the mesh, while retaining the basic advantages of the Balanced weave.

This belt is generally selected for conveyors handling small parts and heavy loads, for foundry shake out conveyors.
G35-19-8-10
G-42-10-6-10
G43-20-10-12
G-72-76-13-16

GRATEX belting is designated by numerals in the same manner as Balanced belting except with the prefix "G."

Mesh Designation

Approx. Mesh
Dia.of Wire in.
Cross Sec.Area sq.in/ft

tMax. Working Tension Ib/ft.

Weight Ib./sq.ft
G-21-8-4
1/2"
 .255
1.670
6680
10.00
G-35-19-.250-10
3
 .250-.135
1.001
4915
10.50
G-35-21-6-10
3
 .192-.135
1.002
4760
8.50
G-36-8-10-12
3
 .135-.105
.629
2830
3.00
G-42-10-6-10
31/2
 .192-.135
1.202
5710
6.50
G-43-20-10-12
31/2
 .135-.105
.752
3385
5.25
G-43-30-10-12
31/2
 .135-.105
.752
3385
6.75
G-48-47-14
4
 .080
.483
1930
4.25
G-69-60-14-16
6
 .080-.063
.423
1480
4.38
G-72-76-13-16
6
 .092-.063
.442
1585
5.75

 

*Units per foot of belt width

For steel and stainless steel belts operating at temperatures to 600'F(316¢ªC). maxium For special conditions, hogher temperatures, and explanation of "Maximum Working Tension" see BELT ENGINEERING selection

Copyright ¨Ï 2001 ILDONG MESH BELTS CO.,LTD. All rights reserved
Design by DEZIGN VALLEY